Correction to: The influence of renewable energy use,human capital,and trade on environmental quality in South Africa: multiple structural breaks cointegration approach

Environmental Science and Pollution Research - A Correction to this paper has been published: https://doi.org/10.1007/s11356-020-11860-3     

Throughfall,stemflow, and interception characteristics of coniferous forest ecosystems in the western black sea region of Turkey (Daday example)

This study aims to identify precipitation, throughfall, stemflow, precipitation, and interception processes in pure black pine, pure Scots pine, and mixed black pine–Scots pine forest ecosystems and present the precipitation partitioning according to different stand types. Throughfall and stemflow measurements were performed using five standard precipitation gauges in a pilot area established to represent pure black pine, pure Scots pine, and mixed black pine–Scots pine stands in the Bezirgan Basin. The total precipitation was measured in an open field close to the study area. Throughfall values were calculated as the percentage of precipitation measured in an open field. According to the results of the study, the throughfall values were 69.8% in black pine, 73.9% in Scots pine, and 77.7% in the mixed black pine–Scots pine stands; the stemflow values were 2.6% in black pine, 5.9% in Scots pine, and 3.1% in the mixed black pine–Scots pine stands; the amounts of precipitation reaching the forest floor were 72.3% in black pine, 79.8% in Scots pine, and 80.7% in the mixed black pine–Scots pine stands; and the interception values were found to be 27.7% in black pine, 20.2% in Scots pine, and 19.2% in the mixed black pine–Scots pine stands.     

Genotoxic biomonitoring study of population residing in pesticide contaminated regions in Göksu Delta: micronucleus, chromosomal aberrations and sister chromatid exchanges

Pesticides are widely used throughout the world in agriculture to protect crops and in public health to control diseases. Nevertheless, exposure to pesticides represents a potential risk to humans. This paper describes a study of possible genetic damage in the people living in regions contaminated with complex mixture of pesticides in G?ksu Delta. In this study, used methods were chromosomal aberration (CA), sister chromatid exchange analysis (SCE) in the peripheral blood lymphocytes, and micronucleus (MN) assay in the buccal epithelial cells. In the present investigation, 32 affected subjects consist of 16 smoking and 16 non-smokings and an equal number of control subjects were assessed for genome damage. Micronucleus (MN), Broken egg (BE), Karyorrhexis (KR), Karyolysis (KL) and Binucleus (BN) frequencies were higher in affected subjects than in controls. Smoking had a statistically significant effect on the Micronucleus, Karyorrhexis and Binucleus frequencies for both the control and the exposed group. Also smoking and exposure affected the frequency of sister chromatid exchange and chromosomal aberrations compared with control groups.     

Energy,exergy analysis,and sustainability assessment of different engine powers for helicopter engines

The rapid decrease of energy resources has accelerated studies on energy efficiency. Energy efficiency refers to the effective use of energy, in other words, completing a specific task to the required standard by using less energy. Exergy is an effective instrument to indicate the effective and sustainable use of energy in systems and processes. Transportation is an important part of human life. The studies on energy saving and the effective use of energy in different areas around the world have also increased for transportation systems and vehicles. With the more effective use of fuel, there will be potential benefits for the environment as well as a reduction in operating costs. This study includes energy and exergy analyses as well as a sustainability assessment by using C₈H₁₆ as a fuel at different engine powers (150–600 SHP (shaft horse power)), for the piston-prop helicopter engine. The maximum exergetic sustainability index was found at the power that provided the maximum energy and exergy efficiency. As a result of this index, the lowest waste exergy ratio, the lowest exergy destruction factor, and the lowest environmental impact factor were obtained. The highest exergy destruction and the highest exergy loss value were obtained at maximum power (600 SHP).     

A new approach for chemical oxygen demand (COD) measurement at high salinity and low organic matter samples

Background, aim, and scope  

Chemical oxygen demand (COD) is used as a discharge standard parameter in wastewater treatment plant design, environmental modelling and many other applications. Chloride interference is an important problem of COD measurement for wastewaters containing low organic matter and high chloride concentrations. In case of chloride concentrations up to 2,000 mg/L, mercury sulphate addition at a ratio of 10:1 (HgSO₄:Cl⁻) can adequately mask the interference. When chloride concentration exceeds 2,000 mg/L, this ratio becomes ineffective to hinder the interference. At this point, it is proposed to use a greater and constant ratio of mercury sulphate addition. However, this application sometimes results in extra mercury sulphate addition which is not necessary. Even in some cases, greater addition of mercury sulphate alone is not a solution to erroneous measurement results. The purpose of the study is to determine optimum HgSO₄:Cl⁻ ratios according to the chloride concentrations of the samples and to show the importance of the strength of the digestion solution for the correct determination of the COD parameter.     

Lead removal in fixed-bed columns by zeolite and sepiolite

The removal efficiency of zeolite (clinoptilolite) and sepiolite from lead containing aqueous solutions was investigated. A series of experiments were conducted in batch-wise and fixed-bed columns. Synthetic wastewaters containing lead (50 mg l (-1)) and acetic acid (0.001 N) along with untreated and regenerated clinoptilolites and sepiolites were used in the adsorption studies. Batch tests were mainly conducted to isolate the magnitude of lead precipitation from real adsorption. Adsorption isotherms for both abstraction and adsorption were constructed. The removal of lead is found to be a sum of adsorption induced by ion exchange and precipitation of lead hydroxide. The breakthrough curves were obtained under different conditions by plotting the normalized effluent lead concentration (C/C0) versus bed volume (BV). The ion exchange capacity of sepiolite and clinoptilolite for lead removal showed good performance up to approximately 100 and 120 BV where the C/C0 remained below 0.1, respectively. The lead removal capacity of clinoptilolite bed from wastewater containing only lead yielded 45% higher performance compared to that of acetic acid partly due to a decrease in the effluent pH and consequently in precipitation. Also, the presence of acetic acid in the sepiolite column decreased the bed volumes treated by about 40%. Removal efficiency of lead-acetic system both in untreated clinoptilolite and sepiolite columns was found higher than that in regenerated columns.     

Preparation of briquettes from the Golden Horn bottom sediments by hydro-thermal agglomeration process.

The Golden Horn (GH) sediments, which consist mainly of clay, organic substances and heavy metals, are formed with the contribution of industrial and domestic wastes released in the Golden Horn Estuary. On account of their mineralogical and chemical composition, these sediments may be regarded as a suitable raw material for briquette production. In this study, the utilization of GH dredged bottom sediments was investigated for preparation of briquettes. Dried GH sediments were mixed with lime and sand in different percentages, moulded at various squeezing pressures and hardened under several steam pressure values by autoclaving. The briquettes produced through these different process conditions were tested for compressive strength according to the Turkish standards (TS705). It was found that variations in compressive strength were dependent on the amount of lime (Ca(OH)2) and sand (SiO2) added. Results show that the compressive strength increased with increasing lime and decreasing sand in the mixtures prepared for briquettes. It is concluded that briquettes with a compressive strength value of 294 kgf cm(-2) can be produced. This allows the GH sediments to be taken into account as a raw material in brick production, as far as compressive strength requirements are concerned. This possibility may represent an important way either for reducing environmental pollution or for recycling waste materials in industrial applications.     

Ecological half-life of Cs in mosses and lichens in the Ordu province,Turkey by Cevik and Celik

Twenty-one years after the Chernobyl accident, lichen and moss samples were collected from the Ordu province, which was already chosen for a related study some years ago. It was observed that ¹³⁷Cs activity concentration ranged from 31 to 469 Bq kg⁻¹ in the moss and from 132 to 1508 Bq kg⁻¹ in the lichen samples. The decrease of the activity concentrations in the present measurements (2007) relative to those in 1997 (over a period of 10 y) indicated ecological half-lives between 1.8 and 10.4 y for the moss and between 2.1 and 13.7 y for the lichen samples. It was observed that ¹³⁷Cs was still eminent in the area studied. Moreover, ⁴⁰K activity concentrations and K element concentrations were measured and their relationships were discussed.     

Influence of Carbon Sources on The Production and Characterization of The Exopolysaccharide (EPS) by Bacillus sphaericus 7055 Strain

In this study, EPS produced by five Bacillus spp. strains was determined. The only one strain (B. sphaericus 7055) was selected due to its high EPS production and it was investigated by growing this strain in LB broth medium containing various carbon sources. The highest EPS production of this strain was found in medium containing fructose. However, the effect of different concentrations of fructose and molasses on EPS production by the strain was studied. The maximum EPS yield of the strain 7055 was recorded with 2.5% (w/v) fructose, also the highest EPS production was found in 2.5% (w/v) molasses. The strain 7055 was found to contain (98.6%) galactose and (1.4%) glucuronic acid in control medium whereas the composition of the strain 7055 (2.5% (w/v) fructose) was found to be (99.9%) neutral sugar and (0.1%) Glucuronic acid while the strain 7055 (2.5% (w/v) molasses) was found to contain (65.9%), neutral sugars and (34.1%) glucuronic acid.     

Role of information in collective action in dynamic disaster environments

This study explores the major issues facing collective response operations after destructive earthquakes. The small-n case study design employs qualitative and quantitative methods to investigate the decision-making process in a context of seismic risk to exemplify how public managers can utilise information and communication systems to ensure collaborative actions in managing an extreme event. Fifty-eight semi-structured interviews with 39 key decision-makers and researchers and content analyses of daily reports from Cumhuriyet comprise the main data sources. The study compares and contrasts the Turkish disaster management system following the Marmara and Duzce earthquakes of 1999. It addresses whether the use of information and communication technologies significantly affected its performance. The study's findings reveal that difficulties in accessing and exchanging timely and accurate disaster-relevant information inhibited coordination during the Marmara response while increased communication functions improved coordination and search-and-rescue activities during the Duzce response.